Designed base on TI-Chipcon's CC2500 wireless transceiver chip, DL-24TRGC is a compact, cost-effective, remote wireless transceiver module, which is widely used in smart home, toy aeromodelling and close-range data transmission control fields. Sensitivity up to -105dbm, maximum transfer rate up to 500Kbps, output power through register configuration range from -30dbm to +1dbm. The module is integrated with all RF related devices and has PCB onboard antenna, so excellent RF performance can be obtained without additional antenna configuration.

This module uses standard 8PIN output. RSSI and low power mode can be set up effectively in the application to reduce the cost. You can easily develop wireless products with stable performance and high reliability directly, which will extremely shorten the development cycle without in-depth understanding of RF circuit design. Manual welding is required due to different thermal expansion coefficient of the black glue and the binding wire inside.

Applications

Logistics tracking, warehouse patrols, RFID (radio frequency identification);

Replace 232, 485 for wireless data communication;

Wireless data collection and control for industrial instruments and meters;

Automatic AMR (Water, Electricity, Gas) meter reading system;

Building and residential (smart home) control;

Wireless remote control for electronic consumer products;

Wireless Alarm, Security & Protection System;

Wireless sensor network, etc.

Features

● The center frequency is 2433MHz, can work in the range of 2400~2483.5MHz

● The maximum output power is +1dBm, and the transmission distance in the open air is more than 100m

● High reception sensitivity, up to -105dbm (2.4Kbps)

● Support GFSK/OOK/2-FSK/ASK/MSK modulation mode, programmable control

● Communication rate 1.2~500Kbs, programmable configuration;

● Separate 64byte transmit/receive data buffer

● Separate 64-byte RX FIFO and TX FIFO

● Built-in CRC check to ensure reliable data transmission

● Supports carrier listening function;

● Digital RSSI output;

● Low power consumption, receiving current less than 15Ma, emission current less than 25mA;

● With a low power consumption mode, the power consumption is less than 2 uA;

● Switching time of the standby and receive state can be set, to reduce power consumption, under the WOR function;

● Integrated temperature sensor;

● Four-line SPI interface, strong versatility;

● Power supply: 1.8~3.6V DC